|
Post by thatbritishdude on Nov 17, 2010 14:04:38 GMT -5
Hammer & Nails Weight: 100kg Shape: A large wedge. Colour: Black all around. Dimensions: 99cm x 70cm x 25cm Drive: 2x LEM-130's @ 48v, powered by 3 NiCad Battlepacks, Shock-Mounted. Locomotion: Steel tank tracks fully inside the body. Armour: 5mm titanium all around. Speed: 12mph Ground Clearance: 0mm at front, 5mm elsewhere. Turning Circle: 0m Weapon: Pneumatic axe/flipper. The axehead can be removed, so the axe can be used as a flipper. Powered by a fire extinguisher, and using a 70mm bore 150mm stroke ram, it can put holes in steel and can smash polycarb to pieces. Srimech: Axe/Flipper if axehead removed. Strengths: Strong weapon. Weaknesses: Opponent has to be in front of it. Bio: My first ever vapourbot. Filled to the brim with practical failure Win/Loss Ratio: N/A
|
|
|
Post by thatbritishdude on Nov 17, 2010 14:06:06 GMT -5
Hammer & Nails 2 Weight: 100kg Shape: A box wedge, like Comengetorix (S6) Colour: Black everywhere with a picture of a tool kit on the baseplate. Dimensions: 133cm x 90cm x 40cm Drive: 4x 24v S28-400 Magmotors, powered by 4x 3000mAh NiCad Battlepacks. Locomotion: 6 vulkanized rubber wheels with Aluminum hubs. Armour: 5mm Titanium for the wedge and sides. 3mm's for the bottom Speed: 17mph Ground Clearance: 0mm at front, 10mm elsewhere. Turning Circle: 0m Weapon: 2 rack-and-pinion style axes, using a 120mm bore 180mm stroke ram and 2 2kg Co2 tanks. Each has a Hydra-style axehead with a diamond-tipped point. They can easily put out 1000kg, enough force to poke holes through steel. The plan is to get bots on the wedge and bring the hammers down. Srimech: The axes. Hubs on side to prevent being stranded. (Not seen in picture) Strengths: Tough armour, good axes, good design. Weaknesses: None discovered yet. Bio: V2 of Hammer & Nails uses 2 axes and Titanium to get the job done. Win/Loss Ratio: 3/6
|
|