|
Post by thatbritishdude on Nov 17, 2010 13:54:22 GMT -5
Gut-Wrench Weight: 100kg Shape: A wide, rather then long, rectangle. Colour: Gold on the top and bottom, with silver at the front, back, and sides. Dimensions: 30cm x 60cm x 25cm Drive: 2 48v E-Tek-RT Motors, powered by 3x 3000mAh NiCad Battlepacks. Locomotion: 2 aluminum wheels with vulkanized rubber tyres and aluminum boron carbide hubcaps. Armour: 4mm hardox monocoque. Speed: 15mph Ground Clearance: 0mm at front due to "Special" weapon, 5mm at back and sides. Turning Circle: 0m Weapons: There are 2 Overkill-shaped 7mm titanium wedges at the front: 1 in a normal position, and 1 inverted to where the inclined faces the inclined end of the other wedge. The plan is: a flipper will get stuck in between the 2 wedges, he will try to fire the flipper to get out, but the flipper will jam and he can't get out, allowing me to relatively easily control the match and the opposing robot. There's also a small 2kg 20cm-diameter vertical Pussycat style blade at the rear, powered by a 24v S28-150 Magmotor, it spins at 1000rpm, can cut aluminum, and can scratch most thicknesses of titanium and 3.25mm Hardox. Srimech: Invertible Strengths: An average 30hp of pushing power. Weaknesses: Can easily be flipped, might not be able to catch flippers and wedges in its twin wedges. Bio: With great friendship comes great rewards. The supposed former clone of Laertes returns to wreak horrible vengeance upon the new generation of robots. Rather old. Contemplating a rebuild Win/Loss Ratio: N/A
|
|
|
Post by thatbritishdude on Sept 12, 2011 15:56:07 GMT -5
Also given to Harry
|
|