Post by welshwarlord on Aug 15, 2008 13:51:14 GMT -5
Robot Name: The Subjugator
Shape: Box with skirts all the way around
Weight: 150kg/200kg (see armour)
Length: 90cm
Width: 90cm
Height: 35cm
Motivation/Drive: 4 x hardox legs with vulkalon rubber feet, they are each actuated by two 10 bar 32mm pneumatic rams from a 5kg tank, they are not visible as they are internal
Armour: 4mm hardox (8mm with 200kg rule)
Weaponry: An 80cm long hardox arm on a 360 degree turret spun by a Bosch 750 watt motor at 12v. On the end of the arm is a large vertical claw, it has two prongs on the top and one on the bottom that goes between the top two when the claw closes (like Mr. Psycho). The prongs are all tungsten tipped and the claw is drilled with several speed holes, the claw is actuated by two M-Mac M40 hydraulic actuators at 2500psi and 12v, one powerign the top prongs and and one powering the bottom ones, this makes 14 tonnes on each side! The arm can move over 180 degrees via a LEM-130 at 36v to flip opponents and slam them onto the ground
Speed: 8mph, pretty fast for a walker
Turning Circle: In the centre of the robot’s base armour there is a 20cm x 20cm circular section that extends to below the robot via another 10 bar ram, but this one is 400mm and takes the gas from its own 1.1kg bottle, once on the ground the circular piece of armour rotates in the direction which I want the robot to go via a Bosch 750 watt motor at 12v
Ground Clearance: 20mm all round, protected by 7mm titanium torsion sprung skirts, held together at the corner s by 5mm hardox hinges
Srimech: The arm can right it in any direction
Colour: Black, with red and gold claw and the name written in white
Strengths: Heavy, unpushable, good weapon
Weaknesses: Comparatively slow turning
Shape: Box with skirts all the way around
Weight: 150kg/200kg (see armour)
Length: 90cm
Width: 90cm
Height: 35cm
Motivation/Drive: 4 x hardox legs with vulkalon rubber feet, they are each actuated by two 10 bar 32mm pneumatic rams from a 5kg tank, they are not visible as they are internal
Armour: 4mm hardox (8mm with 200kg rule)
Weaponry: An 80cm long hardox arm on a 360 degree turret spun by a Bosch 750 watt motor at 12v. On the end of the arm is a large vertical claw, it has two prongs on the top and one on the bottom that goes between the top two when the claw closes (like Mr. Psycho). The prongs are all tungsten tipped and the claw is drilled with several speed holes, the claw is actuated by two M-Mac M40 hydraulic actuators at 2500psi and 12v, one powerign the top prongs and and one powering the bottom ones, this makes 14 tonnes on each side! The arm can move over 180 degrees via a LEM-130 at 36v to flip opponents and slam them onto the ground
Speed: 8mph, pretty fast for a walker
Turning Circle: In the centre of the robot’s base armour there is a 20cm x 20cm circular section that extends to below the robot via another 10 bar ram, but this one is 400mm and takes the gas from its own 1.1kg bottle, once on the ground the circular piece of armour rotates in the direction which I want the robot to go via a Bosch 750 watt motor at 12v
Ground Clearance: 20mm all round, protected by 7mm titanium torsion sprung skirts, held together at the corner s by 5mm hardox hinges
Srimech: The arm can right it in any direction
Colour: Black, with red and gold claw and the name written in white
Strengths: Heavy, unpushable, good weapon
Weaknesses: Comparatively slow turning