Post by paulc on May 5, 2008 11:05:57 GMT -5
KNYFE
• WEIGHT: 100kg.
• ARMOUR: 3.25mm Hardox monocoque on the rear, top, front and sides. 4mm Titanium on the base. Inside, I have 4cm of Vulkanised rubber to make sure its good when facing spinners.
• SHAPE: An invertible box shape, with varing front ends. The sides and rear meet at a fine triangualar point
• MOTORS: 2 x LEM200’s at 48V = 50HP
• LOCOMOTION: 6 Vulkanised Wheels.
• DIMENSIONS: (L) 80CM (W) 70CM (H) 30CM
• COLOUR: The body (and each weapon set-up) is silver with golden edges, and name on top with thick black outlines for each letter
• WEAPONRY: Knyfe has weaponry that can be changed around to suite the robots it is facing.
1: A standard concave scoop made from 15mm Hardox, impossible to bend or scratch, and perfect for stopping FBS’
2: A pair of Hardox spikes with diamond-sharp tips. These spikes are on a hindge, and will flip over if the robot is flipped over, and because these spikes scrape the floor, it’s impossible to get under it whilst using them.
3: Front wedges, mounted in a similar way to those on forklift trucks, reaching out 10cm, and made of 8mm G5 Titanium, and of course getting thinner as it reaches the end of the wedges. The point of these is to ground other robots on them, and make them easier to push without resistance.
4: A 10mm Titanium static bucket scoop with an extension. This is for getting under other rammers.
5: A 5mm Hardox front plate with 8 rows of 6 spikes on them, making Knyfe into a useful and dangerous rammer, as the spikes are each 1.4cm long, and diamond tipped. And a 100kg robot hitting you at 20mph with diamond-tipped spikes is going to hurt most armours.
• SPEED: 20mph
• GROUND CLEARANCE: 0-8mm. The front will always be 0, and the sides and rear are protected by 7mm Titanium skirts on a rotary joint that joint at the hindges.
• STRENGTH: Powerful drives and interchangeable weaponry.
• WEAKNESS: Wheels might be targets for axes and crushers.
Battle Record: 7-5
• WEIGHT: 100kg.
• ARMOUR: 3.25mm Hardox monocoque on the rear, top, front and sides. 4mm Titanium on the base. Inside, I have 4cm of Vulkanised rubber to make sure its good when facing spinners.
• SHAPE: An invertible box shape, with varing front ends. The sides and rear meet at a fine triangualar point
• MOTORS: 2 x LEM200’s at 48V = 50HP
• LOCOMOTION: 6 Vulkanised Wheels.
• DIMENSIONS: (L) 80CM (W) 70CM (H) 30CM
• COLOUR: The body (and each weapon set-up) is silver with golden edges, and name on top with thick black outlines for each letter
• WEAPONRY: Knyfe has weaponry that can be changed around to suite the robots it is facing.
1: A standard concave scoop made from 15mm Hardox, impossible to bend or scratch, and perfect for stopping FBS’
2: A pair of Hardox spikes with diamond-sharp tips. These spikes are on a hindge, and will flip over if the robot is flipped over, and because these spikes scrape the floor, it’s impossible to get under it whilst using them.
3: Front wedges, mounted in a similar way to those on forklift trucks, reaching out 10cm, and made of 8mm G5 Titanium, and of course getting thinner as it reaches the end of the wedges. The point of these is to ground other robots on them, and make them easier to push without resistance.
4: A 10mm Titanium static bucket scoop with an extension. This is for getting under other rammers.
5: A 5mm Hardox front plate with 8 rows of 6 spikes on them, making Knyfe into a useful and dangerous rammer, as the spikes are each 1.4cm long, and diamond tipped. And a 100kg robot hitting you at 20mph with diamond-tipped spikes is going to hurt most armours.
• SPEED: 20mph
• GROUND CLEARANCE: 0-8mm. The front will always be 0, and the sides and rear are protected by 7mm Titanium skirts on a rotary joint that joint at the hindges.
• STRENGTH: Powerful drives and interchangeable weaponry.
• WEAKNESS: Wheels might be targets for axes and crushers.
Battle Record: 7-5